Biaxial Fiberglass Mesh In Road Construction
Below is the pavement method for biaxial fiberglass Mesh in road construction:
Biaxial fiberglass mesh is installed as pavement surface layer.
The new asphalt concrete pavement, biaxial fiberglass geogrid can be placed on the semi rigid base and under seal, can be placed between the seal and the asphalt.
For the new cement concrete road surface, biaxial fiberglass geogrid should be placed between the semi-rigid base and the rigid cement concrete seal.
On the maintenance of old asphalt pavement, oil spray, anchorage and self adhesive type fiberglass geogrid can be used to lay on the original pavement. It is also possible to make 20mm-30mm fine particle asphalt concrete leveling layer on the original road surface, then lay biaxial fiberglass geogrid in road construction, then lay the asphalt concrete surface, and the thickness should be 60-100mm.
For old cement pavement maintenance, self-adhesive method and fuel injection method can be used to lay biaxial fiberglass geogrid on the original pavement, and also to make 20mm-30mm fine particle asphalt concrete leveling layer on the original pavement, then lay fiberglass geogrid, then lay the asphalt concrete surface, and the thickness should be 60-100mm.
The anchorage method can be used in the new pavement surface, and the self-adhesive method can be used to carry out the construction.
Mesh Size: 25.4mm*25.4mm 12.7mm*12.7mm
Roll Width: 3.95m 6m or as per request
Roll Length: 100m
Contact: Nicky Li Mail: email@example.com